• <pre id="tdwuz"></pre>
    <object id="tdwuz"></object>

    1. <p id="tdwuz"></p>
    2. <p id="tdwuz"></p>

      <table id="tdwuz"></table>
      搜索
       
      News Center
      Five stages of PE pipe hot melt connection
      Author:管理員 ?? Posted on:2019-07-05 08:39:16 ?? Browse (364)
      Summary:In order to meet the needs of the project, PE pipes are usually connected, and there are many connection methods for this pipe, such as flange connection, electrofusion connection, etc. Each connection method has its own advantages......

             In order to meet the needs of the project, PE pipes are usually connected, and there are many connection methods for this pipe, such as flange connection, electrofusion connection, etc. Each connection method has its own advantages. What I will share with you today is Its hot melt connection, this connection method can be roughly divided into five stages, what are they? The following is a detailed introduction for you.

             1. Preheating stage

             The molten ring used to establish butt welding at this stage is entered after the welding preparation work (positioning, milling the pipe end face, butt pressure calculation, welding temperature calculation) is completed. In addition to heating the pipe end face of the PE pipe, its other The purpose is to eliminate the small gaps remaining on the end face of the pipe.

             Second, the heating stage

             This stage is used to spread the temperature inside the material, forming a molten region, usually at a pressure close to zero (or just a pressure that keeps the tube end from detaching from the heating plate).

             Three, take out the heating plate stage

             This stage is used to remove the heating plate so that the surfaces to be welded are brought into contact. The shorter the time of this stage, the better, as far as possible to avoid heat loss or foreign objects (dust, sand, etc.) falling on the end face of the pipe to be welded, so as to avoid reducing the welding strength or welding failure of the PE pipe.

             4. Welding stage

             This stage is the process in which the molecular chains of the molten material on the welding end face are rewound and combined under the action of pressure, which is marked by the establishment of a uniform welding ring.

             5. Cooling stage

             Welding end stage, this stage is used to avoid the interference of various external forces that may reduce the strength of the connection.

             There are many advantages about the hot melt connection method of PE pipes. In order to give full play to its advantages, it is necessary to do a good job in the details of each stage. In the later stage, in order to better carry out pipeline transportation, it should be used in accordance with transportation specifications and requirements.

      ?

      Online
      service

      ?

      Online serviceservice hours:9:00-18:00

      Select customer service communication:

      ?

      Hotl
      ine

      ?

      0571-82468855
      Consulting service hotline

      ?

      WeChat
      scan

      WeChat public account
      91亚洲精品无码永久在线观看_亚洲国产成人久久综合一区_国产女人的高潮国语对白_国产蝌蚪视频一区二区三区